Chapter I. Unified Boot Option ROM
Chelsio Unified Boot 47
7. iSCSI boot process
Before proceeding, please ensure that the Chelsio adapter has been flashed with the provided
firmware and option ROM (See Flashing Firmware and option ROM).
7.1. Legacy iSCSI boot
i. Reboot the system.
ii. Press [Alt+C] when the message to configure Chelsio adapters appears on the screen.
iii. The configuration utility will appear as below:
Choose the adapter on which you flashed the option ROM image. Hit [Enter].
iv. Enable the adapter BIOS if not already enabled. Hit [Enter].
Use the default values for Boot Mode, EDD and EBDA Relocation parameters,
unless instructed otherwise.
To Next Page
Loading...
General