Chapter I. Unified Boot Option ROM
Chelsio Unified Boot 48
v. Choose iSCSI from the list to configure and hit [Enter].
vi. Choose the first option, Configure Function Parameters, from the list of parameter type
and hit [Enter].
vii. Enable iSCSI BIOS if not already enabled. Select the iSCSI OS Initiator based on the OS
you are installing. iBFT (iSCSI Boot Firmware Table) will be selected by default.
• Linux: Only iBFT is supported.
• Windows: Select CBFT to use Chelsio iSCSI Initiator, cht4iscsi during OS installation. If
iBFT is selected, MS iSCSI Initiator will be used.
• ESX: Select CBFT to use Chelsio iSCSI Initiator, cheiscsi during OS installation. If iBFT
is selected, ESXi iSCSI Initiator will be used.
You can also configure the number of iSCSI login attempts (retries) in case the network is
unreachable or slow.
To Next Page
Loading...
General