Chapter I. Unified Boot Option ROM
Chelsio Unified Boot 26
4. Configuring PXE Server
The following components are required to configure a server as PXE Server:
• DHCP Server
• TFTP Server
PXE server configuration steps for different operating systems can be found in following links:
Linux
• https://access.redhat.com/documentation/en-
us/red_hat_enterprise_linux/7/html/installation_guide/chap-installation-server-setup
Windows
• http://technet.microsoft.com/en-us/library/cc771670%28WS.10%29.aspx
• http://tftpd32.jounin.net/ (Use port # 67, set PXE option and provide bootable file name in
settings)
• http://unattended.sourceforge.net/pxe-win2k.html
VMware
• http://www.vstellar.com/2017/07/25/automating-esxi-deployment-using-pxe-boot-and-
kickstart/
• http://fdo-workspace.blogspot.in/2016/11/building-tftp-dhcp-for-pxe-esxi-65.html
Chelsio Communications does not take any responsibility regarding contents given
in below mentioned links. They are given for example purposes only.
To Next Page
Loading...
General