Chapter I. Unified Boot Option ROM
Chelsio Unified Boot 19
vii. Enter the path to the Option ROM file and press [Enter].
viii. Similarly, you can use the above method to update Firmware present in the CHELSIO
directory.
ix. Reboot the machine for changes to take effect.
3.3.3. HII
i. Go into the BIOS setup.
ii. Chelsio HII should be listed as Chelsio T5/T6 as shown below. Highlight it and press
[Enter].
If Chelsio T5/T6 is not listed,
• Load the Chelsio uEFI driver as mentioned in Loading uEFI driver section.
• Flash the Option ROM and Firmware as mentioned in drvcfg section.
To Next Page
Loading...