Chenbro Storage Chassis
8-Port 12Gbps Mini-SAS HD Backplane User Manual
Http://www.chenbro.com
Chapter 1 Introduction
This manual gives technical information needed to use the 80H10323606A0 (8port, 12Gbps) backplane,
which can fit into RM23608 model.
Features
Fit into RM23608 model.
Provide connector for standard power supply
Support HDD indicators for each hard drive.
Support Smart Fan Speed Control for energy saving.
Connectors
Refer to the section of Connectors Location for connector placement.
A. SFF-8482 HDD connector (29 pin) x 8 for SAS/SATA HDD connection
B. SFF-8643 Mini-SAS HD Connector for host connection x 2
C. Standard 4P Power connector x 4 for +5V and +12V from power supply
D. Pin Header 2.54mm (2x3) x 1 for front panel fail LED indicator and mute switch connection.
E. 2510 Wafer 2.54mm connector 4P x 4 for system fan connection
F. 2510 Wafer 2.54mm connector 2P x 2 for PSU TTL (Transistor-Transistor Logic) signal
G. Wafer 2.5mm connector 4P x 1 I
2
C connection, it’s used to link with motherboard BMC.
Board and Environmental Characteristics
Dimension 425.0mm x 54.7mm with thickness 2.4mm
6-Layer PCB
To Next Page
Loading...