1. Clean the hydraulic breaker carefully.
2. Dismount the working tool and lubricate the
front part of the piston, wear bushing, and the
retainer pin.
3. Store the hydraulic breaker in a dry place.
Always keep the breaker in an upright position, if
stored for a long time.
Disposal
A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. The
remaining hydraulic oil must be deposited and any
negative influence on the environment is to be kept
as low as possible.
9800 1050 01f | Original instructions22
RX 2, 3, 4, 6, 8Safety and operating instructions
To Next Page
Loading...
