Technical data
Machine data
RX 8RX 6RX 4RX 3RX 2
8460 050 428460 0500 418460 0500 408460 0500 398460 0500 38Part number
816 (370)600 (272)470 (213)328 (149)207 (94)Service weight, lb (kg)
660 (300)470 (214)370 (168)265 (120)165 (75)Delivery weight, lb (kg)
11,500-26,500
(5.2-12.0)
9,300-19,800
(4.2-9.0)
6,400-13,200
(2.9-6.0)
4,600–9,900
(2.1-4.5)
2,900–6,600
(1.3-3.0)
Suitable carrier weight class,
lb (tonnes)
16.3
(415)
15.0
(380)
13.8
(350)
12.6
(320)
10.4
(265)
Working length of working
tool in standard version, in.
(mm)
3.1 (80)2.8 (70)2.4 (62)2.0 (52)1.7 (42)Working tool diameter, in.
(mm)
Easy PowerEasy PowerEasy PowerEasy PowerEasy PowerStart up mode
3
⁄
5
(15)
3
⁄
5
(15)
3
⁄
5
(15)
3
⁄
5
(15)½ (12)Hose inside diameter P,
in.(mm)
3
⁄
5
(15)
3
⁄
5
(15)
3
⁄
5
(15)
3
⁄
5
(15)½ (12)Hose inside diameter T, in.
(mm)
Capacities
RX 8RX 6RX 4RX 3RX 2
15.9-23.8
(60-90)
11.9-19.8
(45-75)
9.2-15.9
(35-60)
7.9–13.2
(30-50)
4.0–9.2
(15-35)
Oil flow, gpm (l/min)
530-1,000530-1,200520-1,300670–1,500560–1,600Impact rate, bpm
1,740–2,175
(120-150)
1,450–2,030
(100-140)
1,595–2,030
(110-140)
1,595–2,030
(110-140)
1,595–1,885
(110-130)
Operating pressure, psi (bar)
231814128Maximum hydraulic input power, kW
2,610(180)2,465(170)2,465(170)2,465(170)2,320 (160)Pressure relief valve on carrier, psi (bar)
174(12)160(11)203(14)232(16)203(14)Piston accumulator gas pressure (min, at
operating temperature 140-158°F (60-
70°C)), psi (bar)
239(16.5)218(15)276(19)297(20.5)268(18.5)Piston accumulator gas pressure (max, at
operating temperature 140-158°F (60-
70°C)), psi (bar)
435(30)363(25)218(15)363(25)363(25)Back pressure acceptance, psi (bar)
Noise declaration statement
RX 8RX 6RX 4RX 3RX 2
8786858381Sound pressure
1
dB(A)
115114113111109Sound power
2
dB(A)
1
Sound pressure level according to EN ISO 3744 in accordance with directive 2000/14/EC at 10 metres distance.
2
Guaranteed sound power according to EN ISO 3744 in accordance with directive 2000/14/EC inclusive spread
in production.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not adequate for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the breaker is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the
breaker.
239800 1050 01f | Original instructions
Safety and operating instructionsRX 2, 3, 4, 6, 8
To Next Page
Loading...
