1/2
►Stored Codes
Pending Codes
?
z If there are no Diagnostic Trouble Codes present, the display
indicates “No (pending) codes are stored in the module!”
Wait a few seconds or press any key to return to Diagnostic
Menu.
3) View DTCs and their definitions on screen.
$09 1/5
P0118 Generic
Engine Coolant Temperature
Sensor 1 Circuit High
z The control module number, sequence of the DTCs, total
number of codes detected and type of codes (Generic or
Manufacturer specific) will be observed on the upper right
hand corner of the display.
4) If more than one DTC is found, use UP/DOWN scroll button, as
necessary, until all the codes have been shown up.
z If retrieved DTCs contain any manufacturer specific or
enhanced codes, a “Manufacturer specific codes are found!
Press any key to select vehicle make!” message comes up
prompting you to select vehicle manufacturer to view DTC
definitions. Use UP/DOWN scroll button to select
manufacturer and then press ENTER button to confirm.
28
To Next Page
Loading...