z If the manufacturer for your vehicle is not listed, use
UP/DOWN scroll button to select Other and press ENTER
button.
5.2 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the
scan tool to delete not only the codes from the vehicle’s on-board
computer, but also “Freeze Frame” data and manufacturer specific
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do not
erase the codes before the system has been checked completely by a
technician.
This function is performed with key on engine off (KOEO). Do
not start the engine.
1) Use UP/DOWN scroll buttons to select Erase Codes from
Diagnostics Menu and press ENTER button.
2) A warning message comes up asking for your confirmation.
►Alfa Romeo
Audi/VW
BMW ?
Buick
Cadillac
Chevrolet
Diagnostic Menu
To Next Page
Loading...