CHICAGO 98614 - 5.8 Component Test

5.8 Component Test
The Component Test function allows initiating a leak test for the
vehicle's EVAP system. The scan tool itself does not perform the
leak test, but commands the vehicle's on-board computer to start
the test. Different vehicle manufacturers might have different
criteria and methods for stopping the test once it has been started.
Before starting the Component Test, refer to the vehicle service
manual for instructions to stop the test.
1) Use UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press ENTER button.
56
Diagnostic Menu
8/11
On-Board Mon. Test
► Component Test
Vehicle Info. ？
Modules Present
Unit of Measure
2) Wait a few seconds while the scan tool validates the PID MAP.
Component Test
Reading PID…
- Please Wait -
3) From Component Test menu, use UP/DOWN scroll button to
select the test to be initiated.