Press any key to
start test.
key:
Double [ESC] to return
z If you press and hold the power switch, the key name does not
show on the screen, but resets the scanner when powered by
vehicle battery, or turns off the scanner when powered by cell
battery. If it does not restart the scanner or power off the
scanner, the key is not working properly.
3) Double press ESC to return to previous menu.
3.9 Tool Information
The Tool Information function allows viewing of some important
information such as serial number and software version number
of the scanner.
1) From Main Menu, use UP/DOWN scroll button to select Tool
Information and press ENTER button.
Main Menu
6/6
To Next Page