B. This Drive Cycle - indicates status of monitors since the
beginning of the current drive cycle.
An I/M Readiness Status result of “NO” does not necessarily
indicate that the vehicle being tested will fail the state I/M
inspection. For some states, one or more such monitors may be
allowed to be “Not Ready” to pass the emissions inspection.
z “OK” -- Indicates that a particular monitor being checked has
completed its diagnostic testing.
z “INC” -- Indicates that a particular monitor being checked has not
completed its diagnostic testing.
z “N/A” -- The monitor is not supported on that vehicle.
1) Use UP/DOWN scroll button to select I/M Readiness from
Diagnostic Menu and press ENTER button.
...........Diagnostic Menu....... .....
Reading PID…
- Please Wait -
3) If the vehicle supports both types of tests, then both types will be
shown on the screen for selection.
49
To Next Page
Loading...