Chicco nextfit zip - Select Rear-Facing Position

40
41
REAR-FACING INSTALLATION REAR-FACING INSTALLATION
Place Child Restraint rear-facing on selected vehicle seat. Make sure it
is not blocking the vehicle belt buckle.
4
3
REAR-FACING SETUP REAR-FACING SETUP
1
2
3
4
5
6
7
8
9
3
4
•LATCH installation continued on page 42.
•Lap-ShoulderBelt installation continued on page 46.
•LapBeltOnlyinstallation continued on page 52.
Installation Options:
1
2
3
4
5
6
7
8
9
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines for REAR-FACING installation.
Installation on a Slope: Locate the level line on the blue label
near the rear-facing belt path. Adjust the seat recline so that the
level line is level with the ground.
L E V E L
SLO P E
L E V E L
SLO P E
1
2
3
4
5
6
7
8
9
L E V E L
SLOPE
4
L E V E L
SLOPE