CHIGO CAC FCU
2. Type 2
` The model of the following remote controller is Lingtong common remote controller.
TURBO key, LAMP key, AIR FLOW key and CLEAN key is applicable for special latest
developed new models instead of normal ones.
2.1 Introduction of Functional Key
■ ON/OFF key: Press the key and the remote control will switch circularly in the order : ON→
OFF→ON.
When it is powered on at first from off state to on state, the default setting of work
condition is ( The set temperature is 25℃ and the mode , wind speed, swing and air door are
all automatic and there is no LAMP, no TURBO, no CLEAN, no SLEEP, no TIMER and no
HOLD function ). When it is not powered on firstly from OFF state, the work condition is as the
same as the state before stopping. It will cancel LAMP, CLEAN, SLEEP, TURBO and TIME
mode.
■ MODE key: Press the key to switch modes in the order :AUTO→COOL→DRY→HEAT→FAN→
AUTO
■ ▼ key: In DRY mode or AUTO mode, pressing▼key cannot change the temperature. In
other mode, press the key once and the temperature will decrease 1℃ in the order : 32℃→
31℃→…→17℃→16℃ .
To Next Page
Loading...
Need help?
General
