Operation
4. Move your foot off the HST pedal.
6.2 Starting
1. Lock the brake pedal by lowering lock lever with the
brake pedal pressed down.
2. Move blade clutch lever to "OFF" position.
3. Move blade height adjusting lever to "TRAVEL" position.
When starting engine make sure that there is
enough ventilation to prevent poisoning from the
exhaust gas.
5. Move auxiliary speed change lever into "NEUTRAL"
position.
5316M-0602-010
5313M-0602-020
5316M-0602-020
5313M-0602-040
When blade clutch lever is in "ON" position, a safety
switch is engaged and engine will not start.
To Next Page
Loading...