Chapter 3 Repairs 71
Maintenance manual
2016/02
AlveoPC
c. Hydraulic connections
Lay the Alveograph on its side, leaning on its block.
❏ The hydraulic hoses under the Alveograph are hard to remove
because of the elbow coupler. To extract them, press hard on each
side of the plastic ring while pushing the coupler's lock ring and pull-
ing the hose at the same time (A).
❏ To remove the elbow couplers from the block we advise using a
flat blade screwdriver as shown in the figure (B).
❏ To prevent any leaks when the hydraulic hoses are replaced,
push the hose in as far as possible then pull it gently to ensure it is
watertight.
If you remove hoses and couplers, it is advisable to replace
them with new ones.
A1: Basic operations
Operation A1-3 Electrical, pneumatic and hydraulic interconnections
Page: 2/2
Consumables:
Tools:
Cable ties
-
A
B
To Next Page
