Chapter 3 Repairs 73
Maintenance manual
2016/02
AlveoPC
❏ Remove the Alveograph's casing (see op. A1-1).
a. External hydraulic couplers
1. Lay the Alveograph on its side, leaning on its block.
2. Unscrew the knurled nuts on the hose end then extract the
hose using a flat blade screwdriver (A) if necessary, or cut the
hose with a Stanley knife.
3. Unscrew the locknuts fixing the couplers to the frame.
4. Change the hydraulic couplers.
We recommend changing the hydraulic hoses after fitting
these couplers.
A1: Basic operations
Operation A1-5 External hydraulic and pneumatic couplers
Page: 1/1
Consumables:
Tools:
-
-
A
To Next Page
