64
User’s manual
12/2016
GB
SDmatic
❏ A new screen is displayed, which shows in real time:
- the stage number of the test,
- a timer,
- the current inside the solution measured by the probe,
- the temperature of the solution,
- a heating indicator.
The test cycle is performed following 6 stages:
0: rest
1: heating
2: measurement of 0
3: iodine production
4: plateau
5: flour introduction
6: measurement
Note : - The timer starts when the temperature reaches 35°C.
- The current varies starting from stage 3.
Stage number Timer
Current
Temperature
Heating indicator
To Next Page
Loading...
