Chord 2go - Page 19

Chord Electronics
2go | User manual
19
2. On your control device, open a DLNA, UPnP or MPD app of your choice (e.g. BubbleUPnP (Android)
or 8 Player (iOS).
3. In the app, select 2go as the audio output.
4. Select a song from the MicroSD card’s directory to begin playback.
Quickplay
The Quickplay option allows you to look at any MPD playlists stored on the MicroSD card. See chapter 11
for more information.
1. Press the Music tab
2
or use the playback controls on the home screen.
2. Select one of the available playlists to begin playback.
or
3. Select an SD card or the Radio to begin playback.