Chord 2go - Gofigure App - Extra Features

Chord Electronics
2go | User manual
25
15 GoFigure app – Extra features
The GoFigure app’s configuration menu has some extra features that allow you to customize your 2go
audio playback experience.
15.1 DSD / Bit Perfect
Adjusting the volume with the physical controls of your control device can compromise the quality of
the digital signal. DSD / Bit Perfect disables the physical volume control on your control device and
prevents this from happening.
1. In the Settings tab
4
of the configuration menu, toggle DSD / Bit Perfect.
NOTICE
This mode must be enabled for DSD playback via Roon.
NOTICE
Enabling DSD/ Bit-Perfect will disable the control devices master volume control.
15.2 Quickplay
The Quickplay option allows you to look at any MPD playlists stored on the Micro SD card.
1. In the Music tab
2
of the GoFigure app, select the MicroSD card you want to view.
2. Select one of the available playlists to begin playback.
TIP
Quickplay uses the BLE connection between 2go and your control device, so no Wi-Fi connection
is required.
TIP
MPD playlists can be created in applications such as MPDeluxe (iOS), Glider (iOS) or M.A.L.P.
(Android).