Need help?Do you have a question about the Chord MOJO 2 and is the answer not in the manual?
General| Type | Portable DAC/Headphone Amplifier |
|---|---|
| Weight | 185g |
| DAC Chip | Custom Xilinx Artix 7 FPGA |
| Inputs | USB-C, Optical, Coaxial |
| Outputs | 3.5mm headphone jack |
| PCM Support | Up to 768kHz |
| DSD Support | DSD512 |
| Battery Life | Up to 8 hours |
Charge the Mojo 2 fully before use. The battery status light indicates charge level or desktop mode.
Details of battery status lights, VBUS volts, and corresponding charging statuses.
Explanation of battery status lights and their corresponding charge percentages.
Guide on connecting headphones or IEMs to the Mojo 2's 3.5mm ports.
Guidelines for keeping the Mojo 2 safe and maintaining its condition, including warranty info.
Details on the Power, Volume (+/-), and Menu buttons and their operations.
Explains how to navigate menus, change settings, and understand menu colors.
Details on using the Crossfeed feature for enhanced audio imaging and soundstage.
How to adjust EQ settings for bass and treble frequencies using the device controls.
How to activate and deactivate Lockdown Mode to lock device settings and controls.
Guide to installing the GoFigure app and updating the Mojo 2's firmware.
Instructions for integrating the Mojo 2/Poly with Roon audio software.
Steps to use the Poly or a mobile device as a hotspot for direct connection.
Guide to creating and using MPD playlists with a microSD card and streamer.
To Next Page
