Chord SPM 5000 - connecting SPM 603 and SPM 1203

10
connecting your SPM 603
SPM 1203
You need to connect the outputs from your AV processor to your power amplifier
and then connect your power amplifier to your loudspeakers. There are three RCA
inputs. All connections should be made with the power turned off.
RIGHT 
INPUT
PHONO
SOCKET

MAINS
INPUT
LEFT
INPUT
PHONO
SOCKET

CENTRE
INPUT
PHONO
SOCKET
RIGHT
CENTRE LEFT
-VE
+VE
multi-channel power amplifiers
connecting to your power amp using unbalanced RCA style inputs
Use RCA style connectors to connect:
• the Right output of your AV processor to the Right input phono socket (green)
• connect the Centre output of your AV processor to the Centre input (red)
• connect the Left output of your AV processor to the Left input phono socket (blue).
connecting your loudspeakers
Connect your loudspeakers to the following binding posts.
• right (green)
• centre (red)
• left (blue).
See Figure E on page 23.