Chord SPM 5000 - connecting SPM 1900

11
connecting your SPM 1900
You need to connect the outputs from your AV processor to your power amplifier
and then connect your power amplifier to your loudspeakers. There are five inputs.
All connections should be made with the power turned off.
connecting to your power amplifier using unbalanced RCA style inputs
Use RCA style connectors to connect:
• the Right front output from your AV processor to the Right front input phono
socket (green)
• the Centre output from your AV processor to the Centre input phono socket (red)
• the Left front output from your AV processor to the Left front input phono socket
(blue)
• the Right rear output from your AV processor to the Right rear input phono socket
(grey)
• the Left rear output from your AV processor to the Left rear input phono socket
(yellow).
connecting your loudspeakers
Connect your loudspeakers to the following binding posts:
• right front (green)
• centre (red)
• left front (blue)
• right rear (grey)
• left rear (yellow)
See Figure F on page 24.
RIGHT 
INPUT
PHONO
SOCKET

MAINS
INPUT
LEFT
INPUT
PHONO
SOCKET

CENTRE
INPUT
PHONO
SOCKET
RIGHT 
REAR
INPUT
PHONO
SOCKET
RIGHT 
REAR
INPUT
PHONO
SOCKET
RIGHT
CENTRE
LEFT
LEFT REAR
RIGHT REAR
multi-channel power amplifiers