connecting your SPM 2000
You need to connect the outputs from your AV processor to your power amplifier
and then connect your power amplifier to your loudspeakers. There are six inputs.
All connections should be made with the power turned off.
connecting to your power amplifier using unbalanced RCA style inputs
Use RCA style connectors to connect:
• the Right front output from your AV processor to the Right front input phono
socket (red)
• the Right middle output from your AV processor to the Right middle input phono
socket (silver)
• the Right rear output from your AV processor to the Right rear input phono socket
(green)
• the Left front output from your AV processor to the Left front input phono socket
(white)
• the Left middle output from your AV processor to the Left middle input phono
socket (blue)
• the Left rear output from your AV processor to the Left rear input phono socket
(yellow).
connecting your loudspeakers
Connect your loudspeakers to the following binding posts:
• right front (red)
• right middle (silver)
• right rear (green)
• left front (white)
• left middle (blue)
• left rear (yellow).
To Next Page
Loading...
