Load Cell Indicator Initial Setup Procedure
MT2316A
9
Once the LCI has been properly installed, the LCI is ready to be setup.
1. Go to the Setup Screen (Screen 3) by pushing button 3.
2. Setup the LCI Control number, time, and date. Key in the LCI how many bins are connected totthe LCI.
3. Follow the calibration prodedure to calibrate the Loadcells of each Bin.
When all of the data has been entered into the Setup Screen (Screen 3), the LCI is now ready to display the
weight in the Bin.
Initial Setup Procedure
To Next Page
Loading...
