Chore-Tronics® Mobile Server General Information
5
MT2471A
The Chore-Time Chore-Tronics
®
Mobile Server is designed to connect a mobile device to a Chore-Tronics
®
Control to allow access to current conditions, and also allow changes to be made to control settings from a remote
location. Using the equipment for purposes other than specified in this manual may cause personal injury and/or
damage to the equipment.
Supply Voltage: 85-264 Vac 50-60hz
1 Standard Ethernet Port
1 Standard USB Port
If mounting to a wall, use screws (not included) in the mounting holes in the back of the Plastic Box.
Note: Make sure to mount close to a power source and leave room for the USB and Ethernet cables to be plugged
in.
General Information
Specifications
Mounting Instructions
Figure 1.Mounting
Insert Mounting Screws
to mount to the Wall
(Not Included)
8.175" [20.8 cm]
5.5" [14 cm]