Christie DHD700 Instruction Sheet

DHD700/DHD800 Lamp/Filter Replacement Instruction Sheet 1 of 4
020-000207-02 Rev. 1 (10-2010)
DHD700/800 Lamp/Filter Replacement
Instruction Sheet
INTRODUCTION
These instructions outline the details for Lamp and Filter replacement in the DHD700 (Model No. 103-
022105-01) and DHD800 (Model No. 103-029102-01) projectors. NOTICE: Use only a Christie
approved Lamp and Filter Kit for your specific projector model.
KITS REQUIRED
DHD700
003-120504-01 (Replacement Lamp)
003-001726-01 (Replacement Air Filter)
DHD800
003-120577-01 (Replacement Lamp)
003-003378-01 (Replacement Air Filter)
INSTRUCTIONS
LAMP REPLACEMENT
When the projection lamp reaches its end of life, the Lamp
Replacement icon appears on the screen and the LAMP 1/2
REPLACE indicator lights orange. Replace the lamp with a
new one promptly. The timing when the LAMP 1/2
REPLACE indicators should light depends on the lamp mode.
NOTES: 1) The Lamp replacement icon will not appear when
the Display function is set to “Off”, or during “Freeze”. 2) It
is recommended that both lamps be changed at the same time
in order to maintain picture quality (better color balance and
brightness).
Figure 1 Lamp Replacement Icon

Christie DHD700 Specifications

General

Resolution	1920 x 1080
Technology	DLP
Brightness	7000 ANSI lumens
Lamp Life	2000 hours (normal mode), 3000 hours (eco mode)
Light Source	UHP
Light Source Life	3000 hours
Input Connectors	HDMI, VGA, Composite