Chroma 62000H Series User Manual

Programmable DC Power Supply (with Solar Array Simulation) 62000H Series
Operating & Programming Manual
4-14
4.1.2.3 Setting Time
1. Use “ ”, “ ” keys to move the cursor to the column to be set as Figure 4-8
(3) shows.
2. Use numeric keys
0
~
9
or “Rotary” ( ) to set the value.
This function is to set the time sustained. This setting TIME = only appears when SEQ.
TYPE = AUTO.
3. Press “
ENTER
” to confirm.
4. Press “
EXIT
” to return to Program PAGE (Figure 4-3).
4.1.2.4 Setting Voltage
1. Use “ ”, “ ” keys to move the cursor to the column to be set as Figure 4-8
(4) shows.
2. Use numeric keys
0
~
9
or “Rotary” ( ) knob to set the SEQ output voltage
3. Press “
ENTER
” to confirm.
4. Press “
EXIT
” to return to Program PAGE (Figure 4-3).
See section 3.2 for detail description.
4.1.2.5 Setting Voltage Slew Rate
1. Use “ ”, “ ” keys to move the cursor to the column to be set as Figure 4-8
(5) shows.
2. Use numeric keys
0
~
9
or “Rotary” ( ) knob to set the SEQ voltage
conversion slew rate.
3. Press “
ENTER
” to confirm.
4. Press “
EXIT
” to return to Program PAGE (Figure 4-3).
See section 3.3.2.3 for detail description.
4.1.2.6 Setting Current
1. Use “ ”, “ ” keys to move the cursor to the column to be set as Figure 4-8
(6) shows.
2. Use numeric keys
0
~
9
or “Rotary” ( ) knob to set the SEQ output current
limit.
3. Press “
ENTER
” to confirm.
4. Press “
EXIT
” to return to Program PAGE (Figure 4-3).
See section 3.2 for detail description.

Chroma 62000H Series Specifications

General

Brand	Chroma
Model	62000H Series
Category	Power Supply
Language	English