Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or
damage to the instrument, the operator must refer to an
explanation in the instruction manual.
High temperature: This symbol indicates the temperature
is now higher than the acceptable range of human. Do not
touch it to avoid any personal injury.
Protective grounding terminal: To protect against
electrical shock in case of a fault. This symbol indicates
that the terminal must be connected to ground before
operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to
a procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in personal injury.
Do not proceed beyond a WARNING sign until the indicated
conditions are fully understood and met.
CAUTION
The CAUTION sign denotes a hazard. It may result in
personal injury or death if not noticed timely. It calls
attention to procedures, practices and conditions.
The Notice sign denotes important information in
procedures, applications or the areas that require special
attention. Be sure to read it carefully.
ix
To Next Page
Loading...
Need help?
General
