Chroma 66201 - Page 72

Digital Power Meter 66200 Series User’s Manual
Setting Parameters: <NR2>, 0.00 ~ 99.99
Query Syntax: COMParator:LIMit:CFI?<PMT>
Response Parameters: <NR2> , 0.00 ~ 99.99
Header on: :COMPARATOR:LIMIT:CFI<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[ CALCulate : ] COMParator : LIMit : THDI 66202
Description: This command sets upper and lower boundaries of total harmonic distortion of
current in GONG mode.
Setting Syntax:
COMParator:LIMit:THDI<space><NR2>,<NR2><PMT>
Setting Parameters: <NR2>, 0.00 ~ 99.99
Query Syntax: COMParator:LIMit:THDI?<PMT>
Response Parameters: <NR2> , 0.00 ~ 99.99
Header on: :COMPARATOR:LIMIT:THDI<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[ CALCulate : ] COMParator : LIMit : W 66201 | 66202
Description: This command sets upper and lower boundaries of power in GONG mode.
Setting Syntax:
COMParator:LIMit:W<space><NR2>,<NR2><PMT>
Setting Parameters: <NR2>, 0.00 ~ 9999.0
Query Syntax: COMParator:LIMit:W?<PMT>
Response Parameters: <NR2> , 0.00 ~ 9999.0
Header on: :COMPARATOR:LIMIT:W<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[ CALCulate : ] COMParator : LIMit : PF 66201 | 66202
Description:
This command sets upper and lower boundaries of power factor in GONG
mode.
Setting Syntax: COMParator:LIMit:PF<space><NR2>,<NR2><PMT>
Setting Parameters: <NR2>, 0.000 ~ 9.999
Query Syntax: COMParator:LIMit:PF?<PMT>
Response Parameters: <NR2> , 0.000 ~ 9.999
Header on: :COMPARATOR:LIMIT:PF<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
5-30