3. Remove the cap from the valve
stem and then screw the fitting at
the end of the Sealant Hose onto the
valve stem.
4. Uncoil the Power Plug and insert
the plug into the vehicle’s 12 Volt
power outlet.
NOTE: Do not remove foreign objects (e.g., screws or
nails) from the tire.
Injecting Tire Service Kit Sealant Into The Deflated Tire:
1. Always start the engine before
turning ON the Tire Service Kit.
2. Ensure the Mode Select Knob is to
the Sealant Mode position.
588 IN CASE OF EMERGENCY
To Next Page
Loading...
