4. Pull the strap located on the seat and pull the seat out
of the storage bin. Push the seat rearward making sure
that it locks into the floor. Fold the seatback into the
upright position and pull the headrest up.
NOTE: The seatback may be locked, if it is, it will be
necessary to use the recliner handle to unlock the back
before folding into the upright position.
5. To position the floor panel back into its original state,
grab the bottom corner and extend it outward.
Push Panel Forward
Pull Strap
78 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
