Chrysler Concorde - Page 1249

Fig. 209 Remove Rear Carrier Front Bearing Cone
1 – SPECIAL TOOL 5048–1
2 – SPECIAL TOOL 6545
3 – REAR CARRIER
4 – SPECIAL TOOL 5048
Fig. 210 Low/Reverse Spring Compressor Tool
1 – TOOL 6057
2 – TOOL 5059
3 – TOOL 5058–3
Fig. 211 Compressor Tool in Use
1 – LOW/REVERSE CLUTCH RETURN SPRING
2 – SNAP RING (INSTALL AS SHOWN)
3 – TOOL 5058A-3
4 – TOOL 5059A
5 – SPECIAL TOOL 6057
Fig. 212 Remove Snap Ring
1 – SNAP RING OPENING MUST BE BETWEEN SPRING
LEVERS (AS SHOWN)
2 – SNAP RING PLIERS
3 – SPECIAL TOOL 5059A
21 - 80 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)