Chrysler Concorde - Page 1285

NOTE: Install new driveshaft retainer clips to drive-
shafts.
Fig. 349 Install Oil Pump Attaching Bolts
1 – BELLHOUSING
2 – OIL PUMP
Fig. 350 Install Long Stub Shaft To Bellhousing
1 – LONG STUB SHAFT
2 – SPECIAL TOOL 6669
3 – SLIDE HAMMER C-3752
Fig. 351 Install Long Stub Shaft Snap Ring
1 – SNAP RING
2 – SNAP RING PLIERS
3 – LONG STUB SHAFT
Fig. 352 Install Low/Reverse Accumulator
1 – ACCUMULATOR PISTON
2 – SEAL RINGS
3 – RETURN SPRINGS
4 – (NOTE NOTCH)
21 - 116 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)