If the carrier requires reconditioning, refer to Dif-
ferential Carrier Recondition.
CAUTION: Failure to grind and open stakes on the
transfer shaft nut will result in thread damage to
transfer shaft during nut removal.
Fig. 373 Remove Inner Differential Adjuster Lock
1 – INNER DIFFERENTIAL ADJUSTER LOCK
2 – INNER DIFFERENTIAL ADJUSTER
Fig. 374 Remove Outer Adjuster
1 – OIL SEAL
2 – OUTER ADJUSTER
3 – STUB SHAFT
4 – SOCKET
5 – ADJUSTER LOCK
Fig. 375 Loosen Outer Adjuster
1 – OUTER ADJUSTER
2 – SPECIAL TOOL 6503
Fig. 376 Remove Differential Side Cover, Carrier and
Ring Gear Assembly
1 – RING GEAR
2 – TRANSAXLE CASE
3 – SIDE COVER
21 - 122 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)
To Next Page
Loading...
