NOTE:
The engine must be running for the ventilated seats
to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the
ventilated seats can be programed to come on dur-
ing a remote start.
This feature can be programmed through the
Uconnect system. Refer to “Uconnect Settings” in
“Multimedia” in your Owner's Manual for further
information.
Second Row Bench Seat — If Equipped
The second row bench seat can accommodate two
passengers, while providing easy access to the third
row seats without any folding of the second row
seats.
To recline the seatback, lean forward slightly, lift the
recline lever located on the outboard side of the
seat cushion, and push back to the desired position
and release the lever. Lean forward and lift the lever
to return the seatback to its normal position. Using
body pressure, lean forward and rearward on the
seat to be sure the seatback has latched.
The bench seat does not stow in the floor, but is
removable for added cargo space.
Removing The Bench Seat
1. Adjust the driver and passenger seats forward to
allow room for the bench seat removal.
2. Raise the armrest completely, then lift the recline
lever located on the outboard side of the seat to
fold the seatback flat against the seat cushion.
Recline Lever Location
Folded Position
39
To Next Page
