EasyManua.ls Logo

Chrysler PACIFICA 2018 - Head Restraints - Second Row Quad Seats; Head Restraints - Second Row Bench

Chrysler PACIFICA 2018
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING!
• ALL the head restraints MUST be reinstalled
in the vehicle to properly protect the occu-
pants. Follow the re-installation instructions
above prior to operating the vehicle or occu-
pying a seat.
Head Restraints — Second Row Quad
Seats
The second row outboard head restraints, as well as
the removable 8th passenger seat (if equipped)
have adjustable head restraints.
To raise the head restraint, pull upward on the head
restraint. To lower the head restraint, push the ad-
justment button, located at the base of the head
restraint, and push downward.
NOTE:
If equipped with Stow ‘n Go seating, the head re-
straints are non-adjustable. Do not pull on non-
ad justable head restraints when folding.
Head Restraints — Second Row Bench
The second row bench seat is equipped with adjust-
able head restraints.
To raise the head restraint, pull upward on the head
restraint. To lower the head restraint, push the ad-
justment button, located at the base of the head
restraint, and push downward.
To remove the head restraint, raise it as far as it can
go. Then, push the release button and the adjust-
ment button at the base of each post while pulling
the head restraint up. Seatback angle may need to
be adjusted to fully remove the head restraint. To
reinstall the head restraint, put the head restraint
posts into the holes and push downward. Then,
ad just the head restraint to the appropriate height.
WARNING!
• A loose head restraint thrown forward in a
collision or hard stop could cause serious in-
jury or death to occupants of the vehicle. Al-
ways securely stow removed head restraints in
a location outside the occupant compart-
ment.
• ALL the head restraints MUST be reinstalled
in the vehicle to properly protect the occu-
pants. Follow the re-installation instructions
above prior to operating the vehicle or occu-
pying a seat.
NOTE:
For child restraint tethering, refer to “Occupant
Restraints” in “Safety” for further information.
Bench Seat Head Restraint
1 — Release Button
2 — Adjustment Button
GETTING TO KNOW YOUR VEHICLE
42

Table of Contents