To Next PageTo Next Page
Need help?Do you have a question about the CIAT LX and is the answer not in the manual?
Details warranty periods and conditions for the unit.
Guidelines for safely moving and securing units during transport.
Criteria for selecting an external installation site, considering weight, levelness, and access.
Procedures for lifting, moving, and placing the unit safely using appropriate equipment.
Information on suitable shackles and mounting points for lifting the unit.
Requirements for hydraulic circuit connections on LX model units, including accessories.
Specifics of integrated hydraulic systems for LXH and LXC models.
Overview of the Xtra connect microprocessor module and its main functions.
Covers low, high pressure sensors, and pressostats with their settings.
Details the safety function of the sensor monitoring evaporator temperature.
Describes the safety device monitoring water circulation in the evaporator.
Explains control functions like winding temperature and oil sensors.
Monitors compressor discharge temperature for safety and control.
Details the safety function of oil pressure sensors and the lubrication circuit.
Essential checks before starting the unit, including valve positions and electrical connections.
Common startup problems like low suction or high condensing pressure and their causes.
Procedures for recording operational data and performing basic checks.
Checks for circuit sealing, compressor variation, and safety devices.
Annual inspections including electrical connections, heat exchangers, and oil analysis.
Guidance on identifying fault origins and using regular readings for prediction.
A table listing common anomalies, their probable causes, and remedies.
General