DECLARATION OF ‘CE’ CONFORMITY
The manufacturer MF Group Srl ‐ Via Serra, 2 ‐ 40012 Calderara di Reno ‐ Bologna ‐ Italy,
DECLARES UNDER SOLE RESPONSABILITY THAT THE PLASTIC CARD SYSTEMS
M
AXIMA SERIES
MODELS
861, 841, 821, 821T
TO WHICH THIS DECLARATION REFERS, ARE IN CONFORMITY WITH
THE FOLLOWING EUROPEAN UNION DIRECTIVES:
N° 2006/42/EC
of 17 May 2006 on machinery, and amending Directive 95/16/EC
N° 2006/95/EC
of 12 December 2006 on the harmonization of the laws of Member States
relating to electrical equipment designed for use within certain voltage limits
N° 2004/108/EC
of 15 December 2004 on the approximation of the laws of the Member States
relating to electromagnetic compatibility and repealing Directive 89/336/EEC
N° 2011/65/EU
of 8 June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (recast), replacing Dir. 2002/95/EC
AND WITH PARTICULAR REFERENCE TO THE FOLLOWING
INTERNATIONAL IEC STANDARDS:
EN ISO12100
Safety of machinery - General principles for design - Risk assessment and risk reduction
EN 60204-1
Electrical equipment of machines – safety of machinery
EN 60950-1
Safety of information technology equipment
EN 55022
Radio disturbance characteristics
EN 55024
Immunity characteristics
EN 61000-3-2
Harmonic current emissions
EN 61000-3-3
Voltage fluctuations and flicker
EN 61000-4-2
Electrostatic discharge immunity
EN 61000-4-3
Immunity to Radio frequency electromagnetic fields
EN 61000-4-4
Immunity to Fast voltage transients on Power AC line and serial data line
EN 61000-4-5
Immunity to surge
EN 61000-4-8
Power frequency magnetic field immunity test
EN 61000-4-6
Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-11
Immunity to voltage dips, short interruptions and voltage variations
as demonstrated by test reports Nr 132490 and 132489 dated December 1st, 1999, performed by Istituto Giordano
Srl. – Via Rossini, 2 – Bellaria (RN), competent body authorised in conformation with D. Lgs. 476/92.
PLACE AND DATE OF ISSUE Calderara di Reno, January 2nd, 2013
NAME Alberto MUCELLI SIGNATURE
POSITION President
Person authorised to compile the technical file:
Mr Alberto MUCELLI
Via Serra 2 - Calderara di Reno (BO)
Last two digits of the year in which the CE marking was affixed: 99
To Next Page
Loading...
