CipherLab 8000 Reference Manual

77
CANNOT TURN ON WHEN PRESSING POWER KEY
 Make sure the battery pack is installed properly.
 Re-charge the battery inside the mobile computer and monitor the charging status.
(See
3.5 Power.)
 If the battery is faulty, replace it with a fresh and fully charged battery then.
CHARGING ERROR
 If using a cradle or charger, make sure the power cord is well connected the
cradle/charger and an outlet.
 Check if the battery contacts of the battery itself and the battery compartment are
clean.
 Try to re-charge the battery and monitor the charging status.
Warning! Only use batteries or charging device manufactured by CipherLab. The use
of wrong battery or charging device could result in damage to human body
or the product itself, and will void your warranty.
BUZZER SEEMS NOT WORKING
 Perform the buzzer test. (See 3.3.2 Buzzer.)
 If the problem persists, reload the battery pack and perform the test again.
LED INDICATOR SEEMS NOT WORKING
 Perform the LCD & LED test. (See 3.3.3 LCD & LED.)
 If the problem persists, reload the battery pack and perform the test again.
LCD SEEMS NOT WORKING
 Perform the LCD & LED test. (See 3.3.3 LCD & LED.)
 If the problem persists, reload the battery pack and perform the test again.
KEYPAD SEEMS NOT WORKING
 Perform the keyboard test. (See 3.3.4 Keyboard.)
 If the problem persists, reload the battery pack and perform the test again.
Appendix II
TROUBLESHOOTING

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m