CipherLab 8000 Reference Manual

78
8000 Series Mobile Computer Reference Manual
MOBILE COMPUTER SEEMS NOT WORKING
 Upload all data to the host and perform the memory test. (See 3.3.5 Memory.)
 If the problem persists, reload the battery pack and perform the test again.
CANNOT SCAN BARCODES
LOW BATTERY CONDITION
 Check if the battery icon on the screen indicates a low battery status. If so, replace it
with a fresh battery then.
 If the problem persists, check if the battery contacts get dirty or the battery pack
does not fit to the compartment.
BARCODE READER PROBLEM
 Perform the reader test to see if the reader is working. (See 3.3.1 Reader.)
 If the problem persists, reload the battery pack and perform the test again.
CANNOT DECODE DATA AFTER SCANNING
UNREADABLE BARCODE
 Check if the barcode is defaced. A defaced barcode may not be readable.
UN-PROGRAMMED TO READ
 Check if the scanner is programmed to read the symbologies (types of barcode) that
you are trying to read.
 Try scanning a test barcode of the symbology you are trying to read.
DIRTY SCAN WINDOW
 Check if the scan window gets dirty. Wipe it with a clean and dry cloth, and try again.
OUT OF SCANNING RANGE
 Try adjusting the scanning distance from the scanner to the barcode.

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m