27
Introduction
The prompts/messages conversion between 8-series models are summarized as follows:
Prompts/Messages Conversion
The prompts of upload/download ports are reset to the defaults of the target device. Check it
up on the Startup property page.
For 8500 series, after you select “Convert to 8400”, the prompt “F8:Edit F9:Del” will change
over to 8400’s “F8:Edit Del:Del”.
If you convert an 8300 template file to an 8000 template file, the prompts which are
considered too long will be truncated automatically.
Note: For the prompts on Form property page and Menu Caption/Item Name on Menu
property page, long strings will be truncated when the template file is converted
from 8300 to 8000.
To Next Page
Loading...
Need help?
General
