CipherLab 8300 User Manual

185
Appendix I ScannerDesTbl Array
140 2: Verify Interleaved 25 OPCC Check Digit
1: Verify Interleaved 25 USS Check Digit
0: DO NOT verify Interleaved 25 Check Digit
0
2D, (Extra)
Long Range
141 1: Enable UPC-A System Number & Country Code
0: Disable UPC-A System Number & Country Code
1
2D, (Extra)
Long Range
142 1: Enable UPC-E0 System Number & Country Code
0: Disable UPC-E0 System Number & Country Code
1
2D, (Extra)
Long Range
143 1: Enable UPC-E1 System Number & Country Code
0: Disable UPC-E1 System Number & Country Code
1
2D, (Extra)
Long Range
144 1: Convert Interleaved 25 to EAN-13
0: No conversion
0
2D, (Extra)
Long Range
145 Scanner time-out duration in seconds for
Aiming mode,
Laser mode and Auto-off mode
1 ~ 255 (sec): Decode time-out
0: No time-out (= always scanning)
3 sec.
2D, (Extra)
Long Range
146 Macro PDF Transmit / Decode Mode
2: Transmit any symbol in set / No particular order
1: Buffer all symbols / Transmit Macro PDF when complete
0: Passthrough all symbols
0 2D
147 1: Enable Macro PDF Escape Characters
0: Disable Macro PDF Escape Characters
0 2D
148 N/A --- ---
149 Aiming time-out duration for Aiming mode
1 ~ 65535 (in units of 5 milliseconds): Aiming time-out
0: No aiming
200
(= 1
sec.)
2D, (Extra)
Long Range
150 N/A --- ---
151 N/A --- ---
152 N/A --- ---
153 Focus Mode
2: Smart Focus
1: Near Focus
0: Far Focus
0 8500 -2D
154 1: Enable Decode Aiming Pattern
0: Disable Decode Aiming Pattern
1 2D
155 1: Enable Decode Illumination
0: Disable Decode Illumination
1 2D

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English