CipherLab 8300 User Manual

208
CipherLab BASIC Programming Part I
GS1 DATABAR (RSS) FAMILY
No. (N1%)
Values (N2%) & Description
Default
Scan Engine
102 1: Convert GS1 DataBar to UPC/EAN
0: No conversion
0 2D
, (Extra)
Long Range
103 1: Enable GS1 DataBar Expanded
0: Disable GS1 DataBar Expanded
1
2D, (Extra)
Long Range
104 1: Enable GS1 DataBar Limited
0: Disable GS1 DataBar Limited
1
2D, (Extra)
Long Range
105 1: Enable GS1 DataBar Omnidirectional
0: Disable GS1 DataBar Omnidirectional
1
2D, (Extra)
Long Range
183 1: Enable GS1 formatting for GS1 DataBar Omnidirectional
0: Disable GS1 formatting for GS1 DataBar Omnidirectional
0
2D, (Extra)
Long Range
184 1: Enable GS1 formatting for GS1 DataBar Limited
0: Disable GS1 formatting for GS1 DataBar Limited
0
2D, (Extra)
Long Range
185 1: Enable GS1 formatting for GS1 DataBar Expanded
0: Disable GS1 formatting for GS1 DataBar Expanded
0
2D, (Extra)
Long Range
Convert GS1 DataBar to UPC/EAN
Decide whether or not to convert the GS1 DataBar barcodes to UPC/EAN. If true,
(1) The leading “010” will be stripped from these barcodes and a “0”
will be encoded as the first
digit; this will convert GS1 DataBar barcodes to EAN-13.
(2) For barcodes beginning with two or m
ore zeros but not six zeros, this option will strip the
leading “0010” and report the barcode as UPC-A. The UPC-
A Preamble setting that transmits the
system character and country code applies to such converted barcodes. Note that neither the
system character nor the check digit can be stripped.
 This only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited
barcodes not
decoded as part of a Composite barcode.

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English