205
Appendix II Symbology Parameters
Values (N2%) & Description
1 1: Enable Code 39
0: Disable Code 39
1
Long Range
2 1: Enable Code 32 (Italian Pharmacode)
0: Disable Code 32
0
Long Range
23 1: Verify Code 39 Check Digit
0: DO NOT verify Code 39 Check Digit
0
Long Range
24 1: Transmit Code 39 Check Digit
0: DO NOT transmit Code 39 Check Digit
0
Long Range
25 1: Full ASCII Code 39
0: Standard Code 39
0
Long Range
88 1: Code 39 Length Limitation in Max/Min Length Format
0: Code 39 Length Limitation in Fixed Length Format
0
Long Range
89 Code 39 Max Code Length / Fixed Length1 0
Long Range
90 Code 39 Min Code Length / Fixed Length2
Note
Length1 must be greater than Length2.
0
Long Range
100 1: Enable Trioptic Code 39
0: Disable Trioptic Code 39
0
Long Range
Decide whether or not to perform check digit verification when decoding barcodes.
If true and the check digit found incorrect, the barcode will not be accepted.
Note: “Verify Check Digit” must be enabled so that the check digit can be left out when it
is preferred not to transmit the check digit.
Decide whether or not to include the check digit in the data being transmitted.
Decide whether or not to support Code 39 Full ASCII that includes all the alphanumeric and
special characters.
Refer to Codabar.
To Next Page
Loading...
Need help?
General
