CipherLab 8300 User Manual

237
Appendix V Debugging Commands
GET_READER_DATA$(N%) In
dicating the command GET_READER_DATA$ is processed. N%
is the number of the reader port.
GET_READER_SETTING(N%)
Indicating the command GET_READER_SETTING is processed.
N% is the setting number.
GET_RECORD$(file%[,index%]) Indicating the command GET_RECORD$ is processed.
GET_RECORD_NUMBER(file%[,i
ndex%])
Indicating the command GET_READER_NUMBER is processed.
GET_RFID_KEY(TagType%) Indicating the command GET_RFID_KEY is processed.
GET_SCREENITEM Indicating the command GET_SCREENITEM is processed.
GET_TARGET_MACHINE$ Indicating the command GET_TARGET_MACHINE$ is processed.
GET_TCPIP_MESSAGE Indicating the command GET_TCPIP_MESSAGE is processed.
GET_TRANSACTION_DATA$(N%
)
Indicating the command GET_TRANSACTION_DATA is processed.
N% is the ordinal number of the record to be read.
GET_TRANSACTION_DATA_EX$
(file%,N%)
Indicating the command GET_TRANSACTION_DATA_EX is
processed.
GOSUB(N%)
Indicating the program branches to a subroutine. N% is the line
number of the first line of the subroutine.
GOTO(N%) Indicating the program branches to line number N%.
GSM_CHANGE_PIN(old$,new$) Indicating the command GSM_CHANGE_PIN is processed.
GSM_CHECK_PIN(pin$) Indicating the command GSM_CHECK_PIN is processed.
GSM_SET_PINLOCK(pin$,mode
%)
Indicating the command GSM_SET_PINLOCK is processed.
GT? (N1%,N2%) Indicating the decision “IF N1% > N2%” is processed.
HEX$(N%) Indicating the command HEX$ is processed.
ICON_ZONE_PRINT(status%) Indicating the command ICON_ZONE_PRINT is processed.
INKEY$(A$) Indicating the command INKEY is processed.
INPUT Indicating the command INOUT is processed.
INPUT_MODE(mode%) Indicating the command INPUT_MODE is processed.
INSTR([N%,] X$,Y$) Indicating the command INSTR is processed.
INT(N%) Indicating the command INT is processed.
IOPIN_STATUS(N%) Indicating the command IOPIN_STATUS is processed.
IRDA_STATUS(N%)
Indicating the command IRDA_STATUS is processed. N% is the
connection or transmission status.
IRDA_TIMEOUT(N%) Indicating the command IRDA_TIMEOUT is processed. N% is the
assigned time interval.
KEY_CLICK(status%) Indicating the command KEY_CLICK is processed.
L(N%) Indicating the line number being executed.
LCASE$(X$) Indicating the command LCASE$ is processed.
LCD_CONTRAST(N%) Indicating the command LCD_CONTRAST is
processed. N% is
the contrast level in the range of 1 ~ 8.

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English