Circutor URBAN - How to Use the Charge Point; Start Charging

URBAN - URBAN WB
Instruction Manual
12
3
A
Start Charging
1. The first step is to show the proximity card to the reader
(2)
Once done, the Led Beacon turns Blue and the Display shows the following
sequence of mes sages:
2. Plug the cable to the vehicle, choose one available socket (in case there
are more than one) and plug the cable to the Charge Point.
Once done, the Display shows the following sequence of messages:
(2)
If the proximity card reader is disabled, charge transaction starts
automatically when a vehicle is detected.