Need help?Do you have a question about the Circutor Raption Series and is the answer not in the manual?
General| Manufacturer | Circutor |
|---|---|
| AC Input Frequency | 50/60 Hz |
| Enclosure Rating | IP54 |
| Series | Raption Series |
| Communication Interface | OCPP |
| Protection | Overvoltage, Overcurrent, Short Circuit, Overtemperature |
Details changes made to the instruction manual across various versions, including date and revision codes.
Provides initial greetings and general information about the Charge Point and its capabilities.
Essential safety precautions to be followed before and during the operation of the Charge Point.
Details the primary functionalities and user interface components of the Charge Point.
Visual identification and description of the different external components of the Raption Charge Point.
Technical specifications detailing the physical size and measurements of the Charge Point unit.
Explanation of the LED indicators used to display the charging status of connectors and the unit.
Information on the types and specifications of charging connectors available on the Charge Point.
Initial startup procedure and screens displayed when powering on the Charge Point for the first time.
Step-by-step guide on how to initiate an electric vehicle charging session using the Charge Point.
Handling of error messages and special conditions encountered during session initiation.
Procedure for safely ending an ongoing electric vehicle charging session.
Details on how to interpret the charging process information displayed on the HMI screen.
Information presented upon session completion or interruption, including transaction details.
Instructions for using the emergency stop button and restarting the Charge Point.
Interpreting the symbols and visual cues indicating the status of charging connectors.
How to check the real-time availability and operational status of individual connectors.
Identification and interpretation of various error codes and messages from the Charge Point.
Overview of configuring and monitoring the Charge Point via its Ethernet communication port.
List of hardware and software necessary for setting up and configuring the Charge Point.
Recommended network setup and IP addressing for connecting the Service PC to the Charge Point.
Step-by-step guide for establishing a LAN connection between Service PC and Charge Point.
Initial view of the web interface, showing communication and Charge Point status.
Consulting the status of the Charge Point, connectors, and their availability.
Provides information on every charge transaction started in the Charge Point.
Activating and configuring integrations, such as OCPP, for the Charge Point.
Adjusting various settings related to identification, plugs, communications, and HMI.
Consulting device status, updating firmware, and performing diagnostics on the Charge Point.
Describes how to locate and install the SIM card and set up the modem for connectivity.
Details the overview of the 4G modem and its connection status LEDs.
Step-by-step instructions for inserting the SIM card into the modem.
Connecting to the modem's web interface and configuring network settings.
Explains the goal of OCPP for uniform communication between Charge Points and Central Systems.
Ensuring correct function of OCPP 1.5 by configuring public IP source and available integrations.
Modifying network parameters and settings related to OCPP integrations.
Explains the goal of OCPP for uniform communication between Charge Points and Central Systems.
Ensuring correct function of OCPP 1.6 by configuring public IP source and available integrations.
Details parameters for Charge Point ID, authentication, connection URL, and CS-Password.
Using the PowerStudio client software to connect with the Charge Point for monitoring.
Description of the PowerStudio Client interface for monitoring the Charge Point's status.
How to manage DC and AC output power delivered by the Charge Point using PowerStudio Client.
Steps to set the maximum DC output power for CHAdeMO and Combo connectors.
Procedure for setting the maximum AC output power using the 'Charge Point Setup' software.
Detailed technical specifications for the Raption 50 model, including general, connectivity, and mechanical data.
Technical data including standards, power supply, voltage range, and electrical protections.
List of optional devices and specifications for cable length and protection.
Comparison of different Raption 50 models based on connectors, power, and current.
Technical specifications for Raption 50 HV, EVO, and 100 models, covering various aspects.
Detailed technical specifications for Raption 100 models, including AC input, output power, and connectors.
Contact details for CIRCUTOR SA Technical Support Service for queries or malfunctions.
Information on warranty coverage, repair/replacement policies, and conditions that void the guarantee.
To Next Page
