Raption
98
Instruction Manual
Go to the Setup Webpage → ‘Integrations’ tab → ‘General’ tab
Charge Point supports different versions of OCPP but only one can be enabled at the same
time.
Go back to setup web page and click on the ‘Integrations’ tab, choose the option selected
under ‘Available integrations’ according to your backend policies as shown in the picture:
Note: Charge Point is working as stand-alone if ‘none’ option is selected. All ID cards are
authorized to start/stop a new charge transaction and no requests are sent to the backend.
Configuration
C
To Next Page
Loading...
