URBAN - URBAN WB
Instruction Manual
47
OCPP 1.6
Before starting
B
Go to the Setup Webpage > ‘Network’ tab
Public Address Manager establishes where the Charge Point must obtain the
public IP address in order to send it later to the backend. Dierent values can
be selected in the ‘Address Type’ section:
Choose the option selected under ‘Address Type’ according to your network
topology. When done, please do not forget to save changes using ‘Save’ button
in the upper right bar:
Check following steps in order to ensure the correct function of OCPP 1.6:
To Next Page
Loading...
